Products
50ml Two Components ab Glue Dual Cartridge Adhesive Glue Dispensing Machine
Our 50ml epoxy glue cartridge 1:1 two-component dispensing machine is specially developed for standard 50ml 1:1 side-by-side dual epoxy cartridges. Unlike traditional tank-fed AB glue dispensers, this equipment directly uses pre-packaged 2K epoxy cartridges. It synchronously pushes the built-in pistons of the dual cartridge to maintain a stable 1:1 mixing ratio, and the A&B adhesives are evenly blended through a disposable static mixing nozzle during output. It eliminates manual glue weighing, stirring and ratio calibration, greatly cutting human error and epoxy waste. Compact and flexible, this cartridge dispenser can work standalone or be matched with a 3-axis desktop motion platform to realize automatic path dispensing. Widely used for electronic bonding, PCB sealing, small module potting and component assembly, it is an ideal automatic dispensing solution for small-batch and multi-variety production using 50ml 1:1 pre-filled epoxy cartridges.
Our 50ml epoxy glue cartridge 1:1 dispensing machine is specially designed to work with industry-standard 50ml 1:1 dual two-component epoxy cartridges. No need for separate A&B tank feeding; simply load the pre-filled 50ml 1:1 epoxy cartridge, attach static mixing nozzle, then start automatic dispensing.
It greatly simplifies two-part epoxy operation. The machine pushes the dual cartridge pistons synchronously to guarantee fixed 1:1 mixing ratio. Mixed epoxy flows through static mixer for uniform blending, ideal for low-volume, high-precision bonding, sealing and small potting jobs.
Perfect for factories that use pre-packaged 50ml 1:1 AB epoxy cartridges, avoiding manual weighing and stirring, cutting human error and material waste.
Key Features
- Direct fit for standard 50ml 1:1 dual epoxy cartridge (2K side-by-side cartridge)
- Synchronous piston driving, lock stable 1:1 mixing ratio without manual calibration
- Works with static mixing nozzles for consistent epoxy blending
- Easy cartridge loading & quick cartridge replacement, fast material changeover
- Programmable dispensing volume, speed and dwell time for precise glue control
- Compatible with epoxy, acrylic two-part adhesives packaged in 50ml 1:1 dual cartridge
- Compact structure, can be integrated with 3-axis desktop motion platform for automatic path dispensing
- Reduce waste: only squeeze glue from cartridge as required; leftover glue stays sealed inside cartridge
Applications
- Electronic component bonding, PCB sealing and small module potting
- Sensor encapsulation, connector sealing
- Automotive small parts repair & structural bonding
- Lighting module assembly, LED small housing sealing
- Jewelry, crafts and composite material bonding
- Maintenance & after-market assembly using pre-filled 50ml 1:1 epoxy cartridge
Technical Specifications
| Item | Parameter |
|---|---|
| Compatible Cartridge | Standard 50ml 1:1 dual two-component epoxy cartridge |
| Mix Ratio | Fixed 1:1 (based on cartridge specification) |
| Driving Mode | Pneumatic / Servo piston drive (optional) |
| Dispensing Control | Programmable shot volume & flow speed |
| Mixing Method | Static mixing nozzle (disposable) |
| Compatible Adhesive | 2-part epoxy resin, two-component acrylic adhesive |
| Optional Upgrade | 3-axis desktop motion system for automatic path dispensing （500*500*100MM) |
FAQ Section
Q1: What cartridge does this dispensing machine support? A: It is built for standard 50ml 1:1 side-by-side dual epoxy cartridges. Cartridge with built-in dual pistons.
Q2: Does the machine mix glue automatically? A: Yes. The machine pushes both sides of the 50ml cartridge synchronously, and A+B adhesive flows through static mixer nozzle to get fully blended.
Q3: Can I change glue ratio? A: The mixing ratio depends on the cartridge. This model works for 1:1 50ml cartridge. If you need 2:1 /10:1, you need corresponding cartridge and machine configuration.
Q4: Can it be installed on 3-axis robot for automatic path dispensing? A: Yes, we provide 3-axis desktop version for automatic line dispensing.
Q5: What adhesives can be dispensed? A: Two-component epoxy resin, two-part acrylic adhesives packed in 50ml 1:1 dual cartridge.
Leave a Message
Leave us a message with any questions, we will reply as soon as possible.
